Email this article 
(Universitas Ahmad Dahlan, Indonesia)(2) Shinta Amelia
(Universitas Ahmad Dahlan, Indonesia)(3) Arsyad Cahya Subrata
(Universitas Ahmad Dahlan, Indonesia)(4) Sandhy Auliya Ma'arief
(Universitas Ahmad Dahlan, Indonesia)(5) Irvanda Cheza Noor Fadhilla
(Universitas Ahmad Dahlan, Indonesia)(6) Fakhra Kurnia Yasa
(Universitas Ahmad Dahlan, Indonesia)*corresponding author
AbstractThe Industrial Revolution 4.0 era has encouraged the integration of Internet of Things (IoT) technology in various sectors, including industrial waste management. This article discusses the implementation of IoT technology for processing batik liquid waste in the Randu Alas Batik Community Group, Mrisi, Tirtonirmolo, Bantul Regency, Yogyakarta. Batik liquid waste, which comes from the processing and dyeing process, contains dangerous chemicals that can increase chemical oxygen demand (COD) values and cause water pollution. This community service activity is carried out through outreach, training, and practice in using IoT-based waste processing equipment, which aims to increase community knowledge and skills in managing waste effectively and sustainably. The evaluation results show a significant increase in understanding and application of IoT, reflected in the pretest and post-test results. The conclusion of this activity shows that IoT technology effectively improves the quality of batik waste management and has great potential to be widely applied to maintain environmental sustainability. KeywordsBatik Group; Community Service; Internet of Things; Batik Waste; Waste treatment
|
DOIhttps://doi.org/10.47679/ib.2024895 |
Article metricsRead: 288 | Download: 176 |
Cite |
Full Text Download
|
References
Adha, L. A. (2020). Digitalisasi Industri Dan Pengaruhnya Terhadap Ketenagakerjaan Dan Hubungan Kerja Di Indonesia. Journal Kompilasi Hukum, 5(2), 267–298. https://doi.org/10.29303/jkh.v5i2.49
Anita, E. (2023). Analisis Inovasi dan Kualitas Produk Pada Usaha Batik di Kota Jambi. Jurnal Manajemen, Bisnis Dan Kewirausahaan (JUMBIKU), 3(2).
Anugrah, I. R., Nisa, N. N. A., Luthfiana, F., & Dani, A. M. F. (2022). Penerapan Prinsip Interaksi Antar Molekul dalam Pengolahan Limbah Batik. Jurnal Tadris Kimia, 2(1), 19–28.
Arisanti, I., Kasim, M., & Mardikawati, B. (2024). Peran Aplikasi Artificial Intelligences Ai Dalam Mengembangkan Dan Meningkatkan Kompetensi Profesional Dan Kreatifitas Pendidik Di Era Cybernetics 4.0. Murthada INNOVATIVE: Journal Of Social Science Research, 4, 5195–5205.
Dewi, I. (2024). Revolusi Industri 4.0: Transformasi Digital dalam Manufaktur. Teknologipintar.Org, 4(3), 1–19.
Fendriani, Y., Nurhidayah, Handayani, L., Rustan, & Samsidar. (2020). Pengaruh Variasi Jarak Elektroda dan Waktu Terhadap pH dan TDS Limbah Cair Batik Menggunakan Metode Elektrokoagulasi. Journal Online of Physics, 5(2), 59–64.
Fitria, N., Wulan, N., Anandita, L. D., Prajitna, J., & Vitasari, D. (2024). The Effect of Current Strength, Electrode Distance, and Coagulation Time on the Efficiency of Electrocoagulation of Batik Waste. The 19th University Research Colloqium 2024 Universitas Muhammadiyah Surakarta.
Gunoto, P., Rahmadi, A., & Susanti, E. (2022). Perancangan Alat Sistem Monitoring Daya Panel Surya Berbasis Internet of Things. Sigma Teknika, 5(2), 285–294. https://doi.org/10.33373/sigmateknika.v5i2.4555
Ilham Sayekti, Ulfa Hidayati, C. F. (2020). Rancang Bangun Mesin Canting Cap Elektronik Dilengkapi Pengatur Suhu dan Detektor Kain Berbasis Arduino Untuk Industri Batik Cap. Seminar Nasional Hasil Penelitian Dan Pengabdian Masyarakat Polines, 3(1), 1–23.
Masfufah, D., & Fardhani, A. Y. S. (2022). Pengembangan Motif Batik Cap Menggunakan Konsep Modular Stamp Pada Produk Fashion. TANRA: Jurnal Desain Komunikasi Visual Fakultas Seni Dan Desain Universitas Negeri Makassar, 9(3), 251. https://doi.org/10.26858/tanra.v9i3.36791
Nanda Putri Milania, Muhamad Ghalih Pratama, M. R. (2024). Website Monitoring Perangkat IoT. E-Proceeding of Applied Science, 10(1), 578–586.
Nurhidayah, N., Handayani, L., Samsidar, S., Fendriani, Y., & Rustan, R. (2022). Pengembangan Instalasi Pengolah Limbah (Ipal) Digital Portabel Untuk Limbah Cair Batik Berbasis Iot (Internet of Things). Journal Online of Physics, 7(2), 30–34. https://doi.org/10.22437/jop.v7i2.18189
Pratama, H. A., & Iryanti, H. D. (2020). Transformasi SDM Dalam Menghadapi Tantangan Revolusi 4.0 di Sektor Kepelabuhan. Majalah Ilmiah Bahari Jogja, 18(1), 71–80. https://doi.org/10.33489/mibj.v18i1.229
Sembiring, E. D., Sulistiawati, D., & Pertiwi, S. P. (2023). Optimalisasi Wisata Budaya Batik di Kampung Cikadu, Tanjung Lesung. Batara Wisnu Journal : Indonesian Journal of Community Services, 3(1), 10–25. http://batarawisnu.gapenas-publisher.org/index.php/home/article/view/142
Syukur Alfauzi, A., Purnomo, A., Tjahjono, B., Sai’in, A., Munawwaroh, D. A., Sarjana, P., Teknik, T., Produksi, M., Perawatan, D., Mesin, J. T., Semarang, N., Diploma, P., Mesin, T., Soedarto, J. H., Semarang, K., & Tengah, J. (2024). Rekayasa Mesin Batik Tulis Berbasis CNC dengan Canting Elektrik. Jurnal Rekayasa Mesin, 19(1), 153–160. https://jurnal.polines.ac.id/index.php/rekayasa
Wicaksana, S., Syams, A., & Ahmad, E. (2021). Kiprah Wahyu Subiyantoro dalam Pengembangan Teknik Pembuatan Motif Batik Pamekasan. Jurnal Seni Rupa, 9, 130–145.
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Liya Yusrina Sabila
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.